ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I have a 240, with 280 motor, and have picked up an 82 ZX elec, ign. distributor. I know its possible to run this setup in the 240, but am having trouble understanding the wiring modification necesary!! I have heard that my stock tach will no longer work, but I can live with it. I just need to get it functional. If you know how, please clue me in.
 

·
Registered
Joined
·
650 Posts
> I have a 240, with 280 motor, and have
> picked up an 82 ZX elec, ign. distributor. I
> know its possible to run this setup in the
> 240, but am having trouble understanding the
> wiring modification necesary!! I have heard
> that my stock tach will no longer work, but
> I can live with it. I just need to get it
> functional. If you know how, please clue me
> in.

wow!!! now this one really has me confused. i have a 240 with an L28. im using a stock electronic distributor also, but all i did was run the two wires to the accel super coil that im using, or is it one wire to the coil and one to the resistor? i'll take a look tonight after work.

but anyways, the car runs fine and the stock tach works fine as well. is this some kind of miracle performed by the Z gods??? -ed
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top