ZCar Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter #1
do u guys know where to find coilover kit for z31 turbo 84 or would any nissan modle fit on it ..like alima , 240 sx
 

·
Registered
Joined
·
257 Posts
Tokico makes a full coilover kit for the 300zx not sure if it goes on the 84 Turbo.
 

·
Registered
Joined
·
230 Posts
JIC SF-1: (A kit) (No Rear Coilovers - provides matching struts/springs)

See: http://shop.store.yahoo.com/speedracerparts/worsporcoil.html


Or Ground Control: (DIY)

By: Butter on Jan 31 2005 3:40PM

* "(Item# C coiloverkit) coilover spring kit WELD"
This is the weld on perch you don't really need. For the sleeve/collar, just measure your strut tube diameter and give them that.

* "(item# 7325) front spring 7"x2.5"IDx325in/lbs"
Front springs, 7 is the free length followed by the rate.

* "(Item# CCP5) Camber/Caster plate, 5 bolt"
Not sure if this number will get you the same plate, but it's worth a shot.

* "(Item# Race) Racing coilover conversion kit-not for street use, rear only"
You're gonna have to describe this. It's just a steel threaded sleeve with collar for the 2.5ID spring.

* "(Item# 7350) rear spring 7"x2.5"IDx325in/lbs"
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top