ZCar Forum banner

Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
1,710 Posts
Discussion Starter #1
regarding z32 wheels:
well now after i buy all the **** that i was told was supposed to fit no problem i need a big ass spacer and well a big ass spacer aint gonna fit so do i need to get like a whell adapter type thing but for the same bolt patter so it acts as a spacer but i still have plenty of stud to actully bolt the wheels to

meaning im gonna need some hub centeric $150 crap?

or is there a simpler solution
 

·
Registered
Joined
·
782 Posts
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

Hey I have four 2"inch wheel adapters that bolt to the factory lug pattern
using the factory lug nuts, then it has the same pattern as factory on the adapter.These ones that I have are knock in studs like the factory stuff not screw in and the adapters are made of steel. I used them for about 5 months with no problems I think I paid 60 dollars a piece for them if your interested just email me and ill send you some pics they still look brand new. I would sell them for $90
 

·
Registered
Joined
·
793 Posts
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

This is the same thing that happened to me but I bought the rims with brand new 45's on them and they look so small in the wheel well it not funny looks like **** so I took them off--The Z32 rims are Phat but mine look like sh!t---And yes you need to buy wheel adapters and they are like 60$ a peice..I was quoted 250$ for all 4 at a local speed shop good luck with that
 

·
Registered
Joined
·
1,710 Posts
Discussion Starter #4
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

300zx86t check your mail ill take them

and bdijanni could you post any pics if you have them - that is one thing i am worried about - up front there 225 50s but out back there 245 45s and i just hope it dosnt look hella retarded - but o well ill rock them anyway because right now i have 3 different type tires on my car and the 2 tires that are the same ( out back) one is worn way more due to the weakness of the z31 and its lame one legger burnouts :p
 

·
Registered
Joined
·
4,438 Posts
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

way to be able to read:
<http://z31.com/wheelsandtires.shtml>
 

·
Registered
Joined
·
1,710 Posts
Discussion Starter #6
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

let me guess you would like a pice of cake as well
 

·
Registered
Joined
·
1,710 Posts
Discussion Starter #8
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

thanks for the info - would have been great if i got it the first time instead of the they fit no problem response
 

·
Registered
Joined
·
4,438 Posts
Re: wtf there is no way a 1.5'' spacer is fitting - do you get t

You never asked if anything was required to fit them on the front. You only asked if the 245s would fit directly on the rear. Which they do.
<http://www.zcar.com/forums/read.php?f=2&i=142437&t=142437>

If you had read any of the links supplied when you did ask that question, you would have found the information you sought.

<http://wheelshow.redz31.com> was linked in this thread when you asked:
<http://www.zcar.com/forums/read.php?f=2&i=141260&t=141260>
That site also contains a link to the wheels and tires section on Z31.com.

I found no reference to you asking about the front wheels on the Z31.
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top