ZCar Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I have a '78 280Z and i'm wondering if a 280ZX power stering setup will bolt on to the 280Z. I'm goning to use a '82 280ZX motor in the car, so i was thinking why not see if the power steering will work?

Thanks
Alan 280Z
 

·
Registered
Joined
·
253 Posts
> I have a '78 280Z and i'm wondering if a
> 280ZX power stering setup will bolt on to
> the 280Z. I'm goning to use a '82 280ZX
> motor in the car, so i was thinking why not
> see if the power steering will work?

> Thanks
> Alan 280Z
Alan,
I don't know if it will fit or not, but look around the site at www.zhome.com and under the section that explains how some people have converted their Z's to v-8. I believe it is under the one on putting the Ford engine it has a article on putting power steering it a Z.
It might help you figure a way to do this. And if you do please let me know, I will do the same.
Jon
 

·
Registered
Joined
·
1,158 Posts
Alan and John,

Great question. I'll also be interested in any answers you find, as I have a '75 280Z, as well as a wrecked '82 parts car (for my other Z, an '82 turbo) with the steering intact. I must be getting older, but I sure do like the power steering on the '82. The conversion would be worth a bit of hassle to me to accomplish.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top