ZCar Forum banner
Not open for further replies.
1 - 1 of 1 Posts

· Registered
94 Posts
> I need to know what is the largest size
> wheels that I can put in my 77 280Z. The car
> will have new Eibach 1 drop springs. I
> was looking at using 225-50-16 on all
> corners or perhaps slightly larger un the
> rear if it was possible. any help would be
> greatly appreciated. Thank everyone.

Yes, that size will work fine. You may even be able to go a little larger, but beware of offset and the fact that the inside of the tire or rim may hit your springs.

The offset should be about 3-1/2 inches from the inside of the wheel. Thus, if you buy a 7 wheel it should be set up for zero offset.

Look in the archives, too. There are lots of posts on theis subjuect.

Good luck

1 - 1 of 1 Posts
Not open for further replies.