ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
3,296 Posts
It is located in an autoparts store. Really! It is a test light to check to make sure you have power to your fuel injectors. You can also make one with a common 3 volt flashlight bulb (for all years that use resistor packs) by soldering a couple of wires to the bulb and tinning the ends of the wires so they are stiff enough to plug into your injector connections.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top