ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
Here is the site,tell if you think this might work on a Z.
<A HREF=http://www.faribault.k12.mn.us/brian/camaro/mods/fpr3.htm>http://www.faribault.k12.mn.us/brian/camaro/mods/fpr3.htm</A>
 

·
Registered
Joined
·
136 Posts
Re: Web site about home made fuel pressure regulat

> Here is the site,tell if you think this
> might work on a Z.
>
> <A HREF=http://www.faribault.k12.mn.us/brian/camaro/mods/fpr3.htm>http://www.faribault.k12.mn.us/brian/camaro/mods/fpr3.htm</A>
I did something very similar to a 300ZX a few years back. worked on the same principal except I used the hole for the vaccuum line therefore eliminating the variable fuel press. and the need to take the regulator apart. worked fine for the two years I drove it.

Perry
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top