ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1,826 Posts
Discussion Starter #1
Want a 240 or 280 Z For V8 Conversion near NC. Already checked the boards. Need rust free chassis and body. Bad engine and transmission O.K. Reasonably cheap
 

·
Registered
Joined
·
107,695 Posts
> Want a 240 or 280 Z For V8 Conversion near
> NC. Already checked the boards. Need rust
> free chassis and body. Bad engine and
> transmission O.K. Reasonably cheap
Greg,

I have a 1971 z Its the type 1 thats identical to the 70 model (70 '240 logo and fresh air vents on the hatch). It has a very small amount of rust. I know you said rust free, but the little on here is negligible. Its a stickshift with 86,000 miles. If you're interested, e-mail me and I'll let you know more. Oh, the only rust is a small hole on the passenger floorboard and on both sides behind the front wheels. Thanks. I'm in Yanceyville, 35 miles north of Chapel Hill.
 

·
Registered
Joined
·
107,695 Posts
> Greg,

> I have a 1971 z Its the type 1 thats
> identical to the 70 model (70 '240 logo and
> fresh air vents on the hatch). It has a very
> small amount of rust. I know you said rust
> free, but the little on here is negligible.
> Its a stickshift with 86,000 miles. If
> you're interested, e-mail me and I'll let
> you know more. Oh, the only rust is a small
> hole on the passenger floorboard and on both
> sides behind the front wheels. Thanks. I'm
> in Yanceyville, 35 miles north of Chapel
> Hill.
I have sent several e-mails but I can't get in touch with you. When can I come to look at the car? What shape is the rest of the car in? Is it a parts car? What shape is the interior,electrics and the rest of the body in. Does it have an engine in it presently? Does it run and drive? How much do you want for it? E-mail me back Thanks
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top