ZCar Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
i have a 1983 280zxt that
has leaking injectors and i
am about to replace them .
i could use some info and some
creative ideas about replacing
them thanks MALIK
CALL WORK 18008351515
HOME 510 2269092 EVENINGS.
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #2 ·
If you don't care too much for high performance, you could buy a used non turbo set from your local wrecking yard.
I have been trying to find one Turbo FI for about 2 weeks now with out luck. Anyway, many people mistake leaking hoses for leaking FIs.
You should put a good clamp on the lower section of the leaking FIs to see if they still leak.
Tom
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #3 ·
WHAT A FREAKIN PAIN IT WAS TO CHANGE THAT F.I. THE HARDEST PART WAS THE INSTALL. I FOUND THAT IF YOU LOOSEN ALL THE INJECTORS YOU CAN PULL THE FUEL RAIL JUST ENOUGH TO CLEAR THE F.I. I HAVE AN '83 AND I GOT MY INJECTOR AT AUTO ZONE FOR $50.00
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #4 ·
<b>RE: wanted 280zxt injectors/ info</b>

sure, the part # is fj 23 from standard motor products and they feature a new bosch designed anti clog nozzle and also feature a product warranty. Been using a set on my race 280 for 3 months now with no problems(critical at 6500 rpms).
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top