ZCar Forum banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
257 Posts
Well had to get the , what I believe was a temp sensor , it was behind the right cam gear...anyway it was removed in the jdm motor:( so now that that is done I am going to splice in the Oil cooler for my turbo and get the crossmember switched and it will be time to swap the motor in:):):)
 

·
Registered
Joined
·
257 Posts
Well that was easily solved once I got to looking at it there was two bolts holding it to the manifold so I just took that assembly off and swapped it onto the jdm motor.
 

·
Registered
Joined
·
257 Posts
lol Well I estimate that this motor will be in the car by the end of next week meaning fully done.

Also have to get some 2.5 in pipe for the intercooler set up.

Just ordered a Excelon KDC-X589 and already have 4 Kenwood 6 1/2s and a 8in Kenwood sub with a Kenwood 380x4 4 channel and a Kenwood 600X2 2 channel so that will help the sound system:)



Post Edited (Aug 18, 1:06am)
 

·
Registered
Joined
·
257 Posts
Well all I have to do now is swap in the oil cooler for the turbo and the motor is ready to go back in. Have any suggestions for me on what kind of oil and tranny fliud would work well in this motor?

Was thinkin Royal Purple , Mobil 1, Redline



Post Edited (Aug 18, 1:09am)
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top