ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
345 Posts
Discussion Starter #1
Just wondering if anyone could point me in the right direction to find out about 2 piston brake calipers for an 81 280zx. thanks again
 

·
Registered
Joined
·
345 Posts
Discussion Starter #3
My car pulls left when i brake so i figured i need to do some brake stuff. right now i aiming towards performance. a friend once told me going fast is over rated if u cant stop, he was right, cuz now he cant drive at all.
 

·
Registered
Joined
·
1,760 Posts
Well, you may need to do some brake work if your car pulls to the right, but it may be suspension related too. You could have bad T/C bushings, bad tie rods, ball joints, control arm bushings, ect... Best bet is to look at all the suspension stuff carefully and if you replace any bushings, use urethane ones! They do make a difference. You may want to take your car to a independent garage (I would'nt advise taking a car to Midas, ect...) and getting the car on a rack for a estimate. Could be something simple. If you are mechanically inclined, you can do the bushing replacement yourself.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top