ZCar Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter #1
Hi I'm wondering if anyone else has experienced this - my turn signals work for about 5 minutes, then they go out with neither R or L working. The hazard lights DO work when they are activated. Any help would be much appreciated before I start taking apart the wiring under wheel column. By the way, it's a 1975 280z. Thanks!
 

·
Registered
Joined
·
261 Posts
Sounds like the flasher relay might be failing. The hazards use a separate relay. Replacing it is easy (and relatively cheap), but go for an electronic version instead of the stock type.
 

·
Registered
Joined
·
38 Posts
Discussion Starter #3
OK, so I replaced the flasher but still no signals. Then, I took apart the hazard switch and it was absolutely full of crud! I cleaned the crap out of it and NOW have turn signals. Yes!
 
1 - 5 of 5 Posts
Top