ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I have a 280 block bored to 300 with a e31 head, dished (concave) pistons, normaly aspirated with SUs. I am concidering going turbo. can I use my E31 head, or do I need a turbo head. do most people just get turbo gear from a 280z, including fuel injection and exhaust equipment? and how about cams? I am assuming one needs a specific "turbo" cam right?

Peter
 

· Registered
Joined
·
1,001 Posts
you can use the head if you have the intakes machined to accept the fuel injectors..when the fuel injected intake is bolted to the e31 head the fuel injector tips will hit the head..all you have to do is make a small nothch in the head for the injectors to go in...its pretty easy.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top