ZCar Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
245 Posts
Discussion Starter #1
hi peoples
if i had a custom manifold made to suit the turbo, whats the largest turbo that will fit in the space available ?
this is in a 83 280Z, it is a fairlady so there is no stearing or brake gear in that area and the aircon is also gone so as far as i can see the only thing that will be in the way will be the left side engine mount. am i missing anything other then that?
it is no different otherwise to a 83 280ZX.
thanks for any help
later jeremy


www.jerms280.i8.com
 

·
Registered
Joined
·
532 Posts
Sorry, but it doesn't work that way. You need to get the correct turbo for the ammount of HP you want to make (and be realistic). Once you decide on to HP figure, then build the engine for that. A turbo too large will not spool up, and you will be greatly dissappointed. To find out more about turbo sizing, goto www.turboneticsinc.com. Good luck!!!

Ian
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top