ZCar Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
950 Posts
Discussion Starter #1
Im in the middle of my turbo swap in my 240, and am coming across some problems. The car will not start. At first it sounded like it was about to, but now it just cranks over and nothing. I have ignition, fuel and the timing is on. The ecu seems to be functioning properly. Is there something im missing. Any suggestions would help. Thanks...NB
 

·
Registered
Joined
·
411 Posts
How about spark? I know I had a problem with getting spark after my swap. Does the tach bounce a little when you crank? If not then you may have done the same as me.. and that was that I blew the power trasistor while trying to hook things up right. But once I got everything hooked up right and used a different transistor it fired right up. BTW, the power transistor is the little unit on the coil bracket.
-zakaron
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top