> What is the correct torque pattern for the
> intake and exhaust manifolds?
Intake Manifold:
Start with the left middle head bolt and tighten to 4.5kg-m (32.5 ft-lb). Then move across to the right and do the same. Continue until all the bolts are tighten. Then repeat with a second tightening to 6.5 kg-m (47.0 ft-lb).
12 8 4 2 6 10 14
F rear
11 7 3 1 5 9 13
I cant find the exhaust manifold instructions. I hope this helps.