ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
1,321 Posts
I was just about to make a post to you asking if you had received your new turbo. Most upgraded turbo's you buy will almost always have something that has been used at one time or another, no big deal. In comparison to the stock unit, that turbo looks like a monster. You should see the 60-1 I have, 4 inlet and the compressor housing is even bigger than yours. You should have no problem with spoolup, I was able to get 14-15psi in 1st gear. You should be able to get atleast 12-13 at the minimum, I don't know if you have any port work done! Anyway, when mounting the unit you will need to replace the studs in your manifold to longer ones. You will have to judge for yourself what you need. Also, make sure you place a gasket on both sides of the shim provided. I hope Kevin sent you 2 new shims, although if he sent the old ones they should be ok. Just place some copper seal spray on them. Let me know if you need any assistance. Also, I think the wastegate actuator is a 7-9 psi unit.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top