ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
I recently posted the message below and got the wonderful "no reply" I completed the speedo swap and installed the 79 130mph speedo with the speed sensor for the cruise. The cruise will not work now. It should as the speed sensor plugs into the same place the one did on my 83T analog. I don't really want to pay 150 for the one from Motorsport auto. Anyone done this before successfully?

Previous post-

I have an analog 83T 85mph speedo. It has 4 wires coming off it. Red which attaches to the back off the cluster board, green/black which attaches to a wire in the harness seperatly, and a yellow/black and a green/blk wire in a plastic thing that attaches to the circuit board.
I have the 130mph speedo and it doesn't have any of this stuff. I guess the clip going to the board with the 2 wires is for the cruise and the others I have read maybe the parking brake warning. Does anyone know whats what?
Mike near Sacramento
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top