ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
I'm still at it!!
I'm restoring & trying to get my 260z ready!
I have an interesting phenomenom(something like that anyway)
I am not getting a spark at my spark plugs when I'm turning the engine over, but when I turn the key to the off position the spark plug sparks - it appears that the engine shorts out when it is turning over and as I turn the key to the off position(not the off position) I get a spark.
Any suggestions? Any advise?
 

·
Registered
Joined
·
1,097 Posts
i would say ignition module.. check the wires at the module compared to the wiring schematic.. maybe you left a ground out? i bet you messed with a wire or two recently..
 

·
Registered
Joined
·
63 Posts
Discussion Starter #3
Joeytekno,
Is the 'ignition module' the same thing as the 'transistor ignition'? If not, where would I find the 'ignition module'?
stan260z
 

·
Registered
Joined
·
1,097 Posts
same thing.. check the wires going to and from the distributor also.. not the spark plug wires..and the ground under the afm if its injected
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top