ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
674 Posts
Discussion Starter · #1 ·
Here's my question.
I have an aftermarket turbo on my z. The turbo has four connecters on it. One cools it with water and another drains it out. The other has a feeder for oil and another one drains that one out. I took the engine out to rebuild it and completely disconnected the turbo from the exhaust manifold. I was checking to see if the water and oil feeders were clear when I noticed something. When I blocked off one of the water openings and blew threw it I couldn't get air threw it. That's fine. But when I block off one of the oil openings and blow threw it I could here some air coming threw the front and back of the turbine. I had to put alot of force behind it but air still got threw. Even when an oil opening isn't blocked it takes alot of force to blow air threw it. Is it supposed to be like this?
I was thinking that it may be to completey cover the turbine but if thats the case...wouldn't the car burn oil? Please someone help...Thanks alot.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top