ZCar Forum banner

Skipping at higher RPM 74/260

310 Views 6 Replies 4 Participants Last post by  Low260
Everyone has been so helpful with my electric troubles that I thought I would go for a bit of engine help. Thanks to everyone for helping to get the car on the road. She is running good except when I tach her high going down the road she starts to skip at about 5.5 on the tach. She still climbs in speed and power but she skips and even back fires. She just had a valve adjustment and carbs rebuilt and set up. When this happens the tach jumps all over everywhere as well. Tells me it is something electrical in the firing. Love some help. Thanks Scott
Status
Not open for further replies.
1 - 4 of 7 Posts
Thanks for the input. These are some of the areas I was headed to myself. Hoping the box is ok I C it is expensive. I am runining the NGK. I do not know much about the electronic ignition. Can you replace the pickups and such?
Thanks for the input on the distributor. I will take a look at this as well.
Mark thanks for the input. Wish i could do the points to see but mine is electronic ignition. I know how to trouble shoot the point systems but not sure where to look on the electronic and I hate to just replace stuff.
1 - 4 of 7 Posts
Status
Not open for further replies.
Top