If you're looking to retro fit an E88 head with the larger valves then you're almost right. You need the valves from a N42 or N47(from a Z). The valves from the latter model P90 and P79's have a shorter valve stem hight and won't work. The machine shop will also have to install larger valve seats. Make sure you let the shop know that your increasing the valve size and they need to install the larger 280 valve seats.
As for the transmission, yes the 4-speed will bolt straight up with the F54 block. Keep in mind that the 5-speed is better for perfomance and easily found in most yards.
I hope this helps.
As for the transmission, yes the 4-speed will bolt straight up with the F54 block. Keep in mind that the 5-speed is better for perfomance and easily found in most yards.
I hope this helps.
