ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
I have some wheels that are made by Carroll Shelby for SAAB. They are gold, and like the ones on the orange 240Z in the picture in the corner. Evidently, the offset is not the same, and the tires rub the springs. Is there some kind of spacer that would give me an inch or two, and be secure?

Thanks.
 

·
Registered
Joined
·
5,333 Posts
Re: Shelby Wheels for 72 240Z (Orange car in corne

i used wheels from an '84 300zx on my '81 280zx and had to use spacers. i had a weld shop make me a 1/2" spacer and went to napa order me some 1/2" longer wheel studs. it worked perfect and wasn't too hard to do. good luck. bama
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top