ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
625 Posts
Josh, before I shaved my N42 head it had about .050 of deep circular area with no flat spots and was basically the same sze as the stock bore.So ,if have this head and shave it .050 you will reduce the cc approx 7.25 cc's .I know the other heads are shaped differently so this is probably the only head that has this circular area without any flat spot. Later ,norm
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top