ZCar Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter #1
What's the best way to reduce/remove corrosion in sensors/connectors? A new wire harness is not a real option for me (cost/availability), but I've noticed that several of my sensors and their harness connectors have corrosion (light green caky).

Is there any spray or cleaning method that you guys can recommend? What has worked for you in the past?

My car dies a couple of times in the morning when I first start it, then rough idles until it reaches normal operating temperature. Horrible MPG (10-12 city). I've replaced all the driver's side vacuum lines and am working on the climate control lines now. I'm changing the PCV tomorrow.

FPR is new, injectors are new, plugs/wires new from last year, fuel filter and dist cap/rotor very recent. This is one for the experts.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top