ZCar Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
486 Posts
Discussion Starter · #1 ·
Hey,
I have a couple sets of rear calipers and rotors for my 72 and 70 to convert to disc brakes. I would like to have a picture of the adapter that holds the caliper though so I can machine my own. I know JCR has them, but they are $179! If I have to buy them, fine, but I thought I would ask first to see if someone has a picture they can send me, either a blue print, photograph, anything. Maybe a few dimensions also as a base line. Thanks.
Joshua L.
 

·
Registered
Joined
·
107,695 Posts
I would like to have a picture of
> the adapter that holds the caliper though so
> I can machine my own. Maybe a few dimensions also as a
> base line. Thanks.
> Joshua L.

Joshua why make when you can buy for cheaper.
I bought my brackets of a '84 NISSAN MAXIMA
from my localPICK YOUR PART for $10 including
the backing plates. I have a friend that works
their. My vousin also bought the same the following week. I havd '76 280 my cousin has
a '72 240z.
 

·
Registered
Joined
·
486 Posts
Discussion Starter · #3 ·
I had not heard that before. SO, the rear brakes on a 84 maxima has the plates I need to hold the 79-81 rear z calipers to a 72? I just want to make sure. If so, that would be great. I already have the calipers, so if it works with those calipers, I would be very pleased. Thanks.
Joshua L.
 

·
Registered
Joined
·
107,695 Posts
> I had not heard that before. SO, the rear
> brakes on a 84 maxima has the plates I need
> to hold the 79-81 rear z calipers to a 72? I
> just want to make sure. If so, that would be
> great. I already have the calipers, so if it
> works with those calipers, I would be very
> pleased. Thanks.
> Joshua L.
As I understand it, the bracket from the '82 - '84 will work, Part # 44155-04S10
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top