ZCar Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
381 Posts
Discussion Starter · #1 ·
PROBLEM WITH LCD LIGHT ON RADIO WILL
WORK ONCE IN A WHILE RADIO WORKS FINE.
1983 280ZX
 

·
Registered
Joined
·
107,695 Posts
> PROBLEM WITH LCD LIGHT ON RADIO WILL
> WORK ONCE IN A WHILE RADIO WORKS FINE.
> 1983 280ZX

If you are talking about the actual radio station LED's (ie. 101.9) then I would recommend picking up a new radio at the junkyard, unless you know someone who is an electonics whiz. The radios in that car are modular, so you could probably just replace the radio, without touching your tape deck, assuming that is still working right.
 

·
Registered
Joined
·
680 Posts
> If you are talking about the actual radio
> station LED's (ie. 101.9) then I would
> recommend picking up a new radio at the
> junkyard, unless you know someone who is an
> electonics whiz. The radios in that car are
> modular, so you could probably just replace
> the radio, without touching your tape deck,
> assuming that is still working right.

I would try pick a part. I want to go and get a tape deck and have it redone the radio killer on the car. I can pick up Kern county stason from LA shoot that 100 miles away. and over a mountain. and sounds good.
 

·
Registered
Joined
·
179 Posts
> PROBLEM WITH LCD LIGHT ON RADIO WILL
> WORK ONCE IN A WHILE RADIO WORKS FINE.
> 1983 280ZX
I have an 83 with the same problem - go to R adio Shack and get Electrical Contact cleaner with brush attachment - spray arround all push buttons and work them several times -pull knobs and spray - work brush - let set for 24 hours--- worked for me -grim and body oil work inside all knobs and push buttons - good luck Jerry
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top