ZCar Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
373 Posts
Discussion Starter #1
I rebuilt the top half of my motor adn when I put it back together it now taps where it didn't before .Someone asked me if I had soaked the lifter assembly in oil overnight and I told them no. They told me you are supposed to soak them in oil over night before you put the motor back together .
So here is the question .Is it true that you have to soak them or they will devolop a lifter tick or is something else causing this? I just done an oil change thinking that might help and to my suprise I found over 6 quarts of oil in it this is the first time I have done a change on this one and was wondering if over filling the oil could have caused the problem. Oil pressure after startup now is near 60 at 2000 rpm's .

Any and all help is deeply appreciated and a bnig thanks to z-bum for your help while putting the motor back together.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top