[Unknown User]

Did you install your springs yourself? If so do you remember if the green or brown dot on the springs indicate a top or bottom. Getting ready to do mine and want to be sure .
thanks

 

[Phantom]

> Did you install your springs yourself? If so
> do you remember if the green or brown dot on
> the springs indicate a top or bottom.
> Getting ready to do mine and want to be sure
> .
> thanks
Jeff,
Sorry guy - I talked Jerry over at All Z Car Specialist in Ft. Worth into doing it for me. (817) 483-0383. Had him do springs, struts, new bottom out stops, and the Toyota 4x4 front brake conversion all at the same time. I love it all. Call the outfit you got the springs from & ask them which end is up. If they don't know I would seriously consider whether I wanted to buy from them again in the future.
Merry Christmas,
Phantom

 

[spot]

Phantom, first off, how much did Jerry do it for you. It should be about the same procedure for my '74, but just to get an idea.
second, do you frequent the Haltom city area. I had been told what your car looked like by Chris at Redline and I've seen this car with 2 racing stripes that looks like what I've heard yours looks like in my area. Is it you, if so, can I check it out some day. I work right off 28th and Beach and would love to hook up and see this machine you've got. I always see it at about 5pm crossing Belknap on 28th. Let me know something.
Z ya again?

 

[Phantom]

> Phantom, first off, how much did Jerry do it
> for you. It should be about the same
> procedure for my '74, but just to get an
> idea.
> second, do you frequent the Haltom city
> area. I had been told what your car looked
> like by Chris at Redline and I've seen this
> car with 2 racing stripes that looks like
> what I've heard yours looks like in my area.
> Is it you, if so, can I check it out some
> day. I work right off 28th and Beach and
> would love to hook up and see this machine
> you've got. I always see it at about 5pm
> crossing Belknap on 28th. Let me know
> something.
> Z ya again?

I think it varies with the specific car, springs, etc. but, if I remember right, all the labor came to about $250 - 300. Talk with him, though, I had a lot of stuff done when the car was up in the air so this may not be truly representative of what you want done.
Nope, not my car. Must be someone else that knows how to make a Z look great. Mine has a single wide stripe up the middle with a 1/4 wide pinstripe on either side of it. It also has the Motorpsort Areo II ground effects kit on it.
I'd be glad to give you a tour of it and discuss options, etc. Fire me an e-mail direct and we'll see if we can set up a time/place.
Phantom