ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
replacing the stock digital radio/cassette (its dead) with clarion. The new radio doesn't have an antenna button for the power antenna. I know how to wire it so i can raise and lower it manually (with a switch) but i can't figure out how to make it raise when the radio's on and lower when the radio (or car) is off.

Anyone know how???
 

·
Registered
Joined
·
804 Posts
Your radio should atleast have a wire for power antenna/remote relay. As of the wiring for the antenna, I'm going off of memory when I did it about four months ago. I originally hooked mine up with a switch, but got a new Sony and decided to hook it up to the radio. I connecting the ground and power down together, then hooking the radio antenna wire to the power up. When the radio comes on it over rides the down power, via relay on the antenna. Play with the wires finding the ground first, then with a power supply find which is up/down. Work from there. Hope this helps.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top