ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
1,991 Posts
Discussion Starter #1
As some of you know, I am working on a upper intake fabed from sheet metal, I also have a Pathy intake at a machine shop having the base machined down. I am going to make all the blockoff plates. The intake has been cleaned, and painted black. The "Nissan" is polished. I am going to keep it until I have a completed prototype intake that works. If I am unsuccessful, I will be using this, if I am successful I will be happy to sell it. I have all the componants for the swap. I do not have any of the sensors, as I did not need any of them. It will fit under the hood. Email me
 

·
Registered
Joined
·
35 Posts
in your pics there is a green wire running from th dist cap to your ignition module. PLEASE what does that do and where is it normally connected to on a stock 2+2 non turbo. The guys at the shop "failed" to do alot of things right in my car and thats one of them.
 

·
Registered
Joined
·
35 Posts
alright thanks. there are just alot of bare connectors and wired that look like they should connect to things and busted connector blocks and etc,etc,etc.
these guys really cheesed me off.
good luck on your intake
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top