ZCar Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
4,296 Posts
Discussion Starter #1
Here ya go guys. I know a few others have done this but I figured I'd show my results. . .much thanx to jzack for his technical help. I didn't find it too difficult, just takes some steady hands and a bit of soldering iron work. I actually used the stock bulb holders for the red 5mm LED's, so no solder was needed for that. Technically the only soldering that needs to be done is for the 1 resistor in each pod.
Pics are somewhat blurry to night setting + unsteady hand





 

·
Registered
Joined
·
4,296 Posts
Discussion Starter #2
also, i changed the button-activated LED's to red, but then decided to buy some new amber LED's to go back to the stock look. I am going to fix the blue down arrow on the A/C pod, but you guys get the idea. . .
 

·
Registered
Joined
·
6,813 Posts
Nice work there....
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top