ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,323 Posts
Discussion Starter · #1 ·
N-42 intake plenum and TWM big throat TB for sale.
TB has had all the crap milled off the top of the TB and a nice aluminum plate bolted to the top. So the TB has no previsions for any types of hoses to be bolted on. Simple is better.
N-42 manifold has been port matched to the head/gasket and the TB. All the **** on the manifold has been grinded off and all small pits and unecessary holes have been welded up. The outside of the manifold has been polished. The runners have been enlarged internally and the humps at the ends of the runners where the bolts for the injectors are have been grinded away. The runners have also been honed. Because the towers for the throttle **** have been removed, it will require the adaption of a throttle cable kit. Top-End sells one for $75, but after looking at what it takes, one can easily be fabricated for about $15. One warning, this manifold should only be used if your head has been port matched to the gasket, otherwise you will restrict flow into the head. TB and manifold $375.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top