ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
No power going to the fuel injectors.The ECU is to blame? But if 1 of the sensor's is bad going to the ECU. Maybe that would not generate a pulse going to the injectors. The Haynes Manual skips this part. I guess its time to get a Datsun Manual. If you had this problem,and corrected it. Please let me know. Thanks
 

· Registered
Joined
·
3,319 Posts
If you have no POWER going to the injectors you more than likely have a bad fusible link. The ecu does not provide power, only a ground. Also check ignition wiring and signal to make sure it is correct. The ignition pulse is what tells the computer when to fire the injectors. What have you done to the car recently that might have caused your problem. Go back to that and recheck. If you have done nothing recently, what kind of problems are you having?
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top