ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I have read stories of a swap between the 300ZXT ECU and 280ZXT. Some time ago some one posted the had info on how to do this. I know that JW sells a kit with a reprogrammed ECU with higher curves and other tricks, but I would like the info on how to do it with a junkyard ECU. If anyone can help, please send the info.

Bean Bandit
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #2 ·
Re: Need Info on G1 300ZXT -> 280ZXT ECU swap..

> I have read stories of a swap between the
> 300ZXT ECU and 280ZXT. Some time ago some
> one posted the had info on how to do this. I
> know that JW sells a kit with a reprogrammed
> ECU with higher curves and other tricks, but
> I would like the info on how to do it with a
> junkyard ECU. If anyone can help, please
> send the info.

> Bean Bandit

Clip from stew that he emailed I was not able to get instructions for junkyard info mabey he just bought one from Jim Wolf, if you email him you might get something . Let us know !!

The cool thing now is I know how to
crosswire a stock 300z turbo ECU and MAS and put it in a 280zxt! I've been
running it in my car for about 6mos now and i love it. You can just hear the
air getting suck in now! It's almost louder than the exhaust. One other
reason I did this is because there are aftermarket computers that will piggy
back on the 300z computer eg; AFC, FCON. My next move is getting an AFC
computer. It gives you better control of your fuel curve by allowing you to
tune it through the power curve. Plus you can get 30% bigger injectors with
this setup. With that im hoping for 18lbs. Well I'm just rambling now. E-
mail me back and tell me what you're doing with your Z. My best time to date
is a [email protected] That was with the stock 280 ECU, turbo, and street tires.
With a set of slicks I should be in the mid 12's. I'm willing to help other
guys with Z's too. My motto, Go fast for cheap!
See ya,
Stew [email protected]
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top