ZCar Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Hello to all.

Sorry for my english, it's way not perfect.

I'm from europe. Bought myself a 370z from usa. U-joint was broken, so i bought i used from uk model. After instalation it playes a little (moves forward and back). After unscrewing that side, that goes to differ i can move u-joint forward into gearbox till it stops and then there is clearance between differ and u-joint about 0.1ft
Hope, that you understood me.
Question is - is it ok, or i should make some intermediate piece about 0.1ft sm ?

Hoping for your help guys !

Best wishes from Estonia. :nerd
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top