ZCar Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hey folks... response to my questions as I build back my 82' 280ZXT from a complete teardown has been amazing... thank you all that take the time to share you knowledge and experience.

My latest quandary is a ground wire. The harness runs along the driver (left) side of the engine bay... it has the cable for the air flow meter, cable for the vacuum pump, and a grounding eyelet and bolt. One harness diagram indicates this as a "body ground". The wire for the ground is not very long, and for some odd reason it and the bolt are very rusty, unlike any other connector. See the pic. I am just not finding where, with it's very limited range from the AFM, this ground wire should be mounted... any pics would be greatly appreciated although it might be a real challenge given it is probably somewhere under the AFM?

Thanks again for all the help
Motor vehicle Vehicle Electrical wiring Automotive exterior Auto part
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #3 ·
thanks for the response. Unfortunately my engine bay doesn't have a bracket quite like that, so I am still wondering where it attaches. Some say under a bolt that mounts the AFM to the bracket, but this connection has its own bolt and all the bolts to mount the AFM are accounted for. And I am thinking it does need to connect somehow to the AFM to ground it.
 
1 - 2 of 2 Posts
Top