ZCar Forum banner
Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
i can't find an oil pan ANYWHERE and the dealer wants 250.00 for brand new from Japan.
DOES ANYone know who carries a significantly cheaper one closer to home? Motorsport? Victoria British? All Z East? Do any of these guyz have a catalogue? *I have V.B.s*
I'm turning my driveway into an oil slick of Valdez proportions.
ALSO....can the master cylinder from an 81 fit an 83?
same with parking brake cables?

thankz
 

·
Registered
Joined
·
3,550 Posts
Get a used one

If where you live is like where I live there are tons of them in junkyards. Cheap!!

Ken
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #3 ·
I CAN"T

Well, if where I lived was like where YOU lived then i WOULD have a used one.
But I DON"T. There are NO Datsuns around at ALL. There is one 240, and another 280.
That's IT.
That's why i posted this question.
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #5 ·
Nova Scotia, Canada

The great white north. The true north strong and free.
Actually it's been really warm here.
ANYWAY.
Someone help me out with an Oil Pan. Please?
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #6 ·
<b>Possible solution!</b>

Contact my Z club Ontario Z Car we are a large wide spread club with access to tons of parts. Visit our web site or call my mechanic (he helped me start the club and stores members parts for free as well as an ample supply of his own. Call him @ 905-432-3756 ask for Dieter. tell him ZR8ED (Scott) sent you. If he can't help you let me know here. I'll help you myself.
ZR8ED
 

·
Registered
Joined
·
382 Posts
where is it seeping from?

Does it have a hole in it, or is it just leaking from the gasket, or the plug?

It might be repairable.
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #8 ·
RE: We have used

UPS, and Mail should go to your address.
Your pan should be straightenable by shaping the edge on a flat surface. I have seen these get bent by someone in the past prying them off with a screwdriver. Let me know if you are interested. Thanks, Joe
Tollfree US and Canada
1-800-533-5659
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top