ZCar Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
4,300 Posts
Discussion Starter #1
remember I wanted to make the mold for the lower lip on my z... well I have a question.

in case I dont want for it to look like two separate pieces could i just start laying the FG on the original fascia so the resin glues them together?

or do they have to have some sort of glue on two separate pieces?

could you please detail the process.... Im kinda afraid i totally wreck the thing....

imagine my mold looks as if it were to be placed under the fascia. thanks a million



Post Edited (Jan 10, 3:38pm)
 

·
Registered
Joined
·
14,897 Posts
Line up the two broken pieces and duct tape or clamp it from behind in stabilized position. You probably need to experiment a bit with FG before you try it so you know what to expect. You would be able to pull the part off the fascia after it is dry to the touch, but not hardened. If you let it harden, it will be more or less permanent.
 

·
Registered
Joined
·
4,300 Posts
Discussion Starter #3
thanx man... appreciate it alot.... ill post up pictures once im done with that... would you recomend sanding off the paint before getting started?

and what would you use to bond both pieces together?
 

·
Registered
Joined
·
14,897 Posts
Stripper will work better...just watch the overspray.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top