ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I want stiffer springs on my 81 280zxt. I know the rear camber can get off when the rear suspension is messed with. I was thinking about Tokico lowering springs and shocks or Eibach springs and tokico shocks. I don't want a lot of adjustments on the suspension because I live down a dirt rode and don't want to have to keep getting the alignment done. I doing polyurethane bushings too. Is a 1" lower cause any problems. Thanks

Sam 75 280z, 81 280zxt
 

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #2 ·
<b>RE: Lowered 280zxt rear camber????</b>

Sam, 1 inch lower is about what you see when the 2plus2 cars springs wear out. they look plain awful and 1 inch will put you into neg camber territory. Unless you're doing all of them, get factory springs. If yes to all, get the adjustable camber kits(Moog if you can find them).
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top