ZCar Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
5,015 Posts
The little flat head screwdriver that was included is used to adjust them. Look at the very tip of the rod that extends out from the strut. It is the part that will poke out from the upper strut bushing in your engine bay. It's 4-way adjustable.
 

·
Registered
Joined
·
5,469 Posts
I like how the rear adjust by the knob. Once you but all the plastic back for the cargo area back in, you can't get to the adjusters on the Takicos.

I think there are two different model numbers for the front becasue of the brackets. THe rears don't have the brackets for the brake lines and they need to be left and right.
 

·
Registered
Joined
·
11,803 Posts
Mr. Pulldown is correct. The left right difference on the front is for the brake cable arrangement.
 

·
Registered
Joined
·
10,805 Posts
Another little peice of adviced unless your on a track dont set the rear to 8. Driving on the street with them that stiff can cause them to blow.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top