ZCar Forum banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
320 Posts
Discussion Starter · #1 ·
all right i was going to order a filter for my 76 280z from performanceintl but i couldnt figure out which one to order i dont want the one that fits in the stock airfilter box i want the one that you have to add the pipe and all , so if anybody has the part number it would be greatly appreciated! thanks all
 

·
Registered
Joined
·
107,695 Posts
If you don't want to deal with the hassles of pipe sizes and choosing the right filter, Motorsport Auto has a Ram-Air Induction package to fit your Z-car, with the correct pipe size, and all installation parts. Check out the link below. Hope this helps.
 

·
Registered
Joined
·
107,695 Posts
> all right i was going to order a filter for
> my 76 280z from performanceintl but i
> couldnt figure out which one to order i dont
> want the one that fits in the stock
> airfilter box i want the one that you have
> to add the pipe and all , so if anybody has
> the part number it would be greatly
> appreciated! thanks all

I just installed P/N = K/N RE-0930 $60
(6 cone filter) and Bought 3 plastic pipe
with a 90 deg elbow, used a 3 to 2
easy drain to adapt to intake hose.
works great! Got all supplies from HW store.
It does make a differance!
 

·
Registered
Joined
·
320 Posts
Discussion Starter · #4 ·
steve 77280

> I just installed P/N = K/N RE-0930 $60
> (6 cone filter) and Bought 3
> plastic pipe
> with a 90 deg elbow, used a 3 to
> 2
> easy drain to adapt to intake hose.
> works great! Got all supplies from HW store.
> It does make a differance!
i went to the website and put in the part number and i keep getting an airfilter for a chevy corisica what am i doing wrong?
 

·
Registered
Joined
·
107,695 Posts
Re: steve 77280

> i went to the website and put in the part
> number and i keep getting an airfilter for a
> chevy corisica what am i doing wrong?

I purchased at local performance shop.
That is number on invoice.
Any 6 cone with 3 clamp works.
 

·
Registered
Joined
·
107,695 Posts
> all right i was going to order a filter for
> my 76 280z from performanceintl but i
> couldnt figure out which one to order i dont
> want the one that fits in the stock
> airfilter box i want the one that you have
> to add the pipe and all , so if anybody has
> the part number it would be greatly
> appreciated! thanks all

The # u want is RU-0900

I'm sure there are others that will fit, but this is the one I describe on my filter website.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top