ZCar Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
HEY THERE FELLOW Z HEADS I WAS JUST WONDERING WHAT SIZE MAIN JET,CHOKES,AIR CORRECTORS ETC. SET-UPS ARE USING I HAVE A 74 260 WITH 2.8 F54 BLOCK FLATTOPS PORTED N42 HEAD 280 DUR. CAM 10.5-1 COMPRESSION TRIPPLE WEBBERS(40DCOE) ANY HELP WOULD BE GREATLY APPRECIATED THANK YOU CHRISTURBO
 

·
Registered
Joined
·
5,935 Posts
I'm using 36mm chokes with 145 mains, 190 air correctors, F11 emulsion tubes, can't remeber my idles 50F9's or something I can check that later if you want, the pump jets are 60's with a .05 return valve. I want to try 34 mm chokes since I move to higher elevation I run a little lean in the mid range with the 36's.

My motor is a F54 with custom pistons 11.5:1 with a ported E88. Cam is 495 lift 272/282 duration. Weber 40's. It runs real strong especially on the top end.

Oh yeah turn your caps lock off

Matt
 

·
Registered
Joined
·
16 Posts
Discussion Starter #4
CHRISTURBO wrote:
>
> HEY THERE FELLOW Z HEADS I WAS JUST WONDERING WHAT SIZE MAIN
> JET,CHOKES,AIR CORRECTORS ETC. SET-UPS ARE USING I HAVE A 74
> 260 WITH 2.8 F54 BLOCK FLATTOPS PORTED N42 HEAD 280 DUR. CAM
> 10.5-1 COMPRESSION TRIPPLE WEBBERS(40DCOE) ANY HELP WOULD BE
> GREATLY
> APPRECIATED THANK YOU CHRISTURBO
 

·
Registered
Joined
·
5,935 Posts
LOL

I'm not sure!

YOUR CAP LOCK ON YOUR KEYBOARD IS ON SO EVERYTHING IS CAPITALIZED - IT DOESN'T REALLY BOTHER ME BUT IT IS MOSTLY TAKEN LIKE YOUR YELLING!

See.

Matt
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top