ZCar Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
5,363 Posts
Discussion Starter #1
<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33558&item=7927958791&rd=1>

It's a Nismo Skyline 80mm throttle body. Holy crap I bet that baby right there can flow some air! Unfortunately for me, I only need about a 60mm from the 240SX and I'm gonna buy that from Pallnet along with his fuel rail :)
 

·
Registered
Joined
·
3,952 Posts
I saw a few of those in a yard yesterday.. The guy wouldn't sell them to me cause he said that the engines were still good and he was not parting a good engine.
To use that on a Z, you would have to do some serious work on the intake and then the fuel system. Not to mention that you have the AFM as a bottleneck to deal with....
 

·
Registered
Joined
·
4,687 Posts
60mm is plenty for these engines.
 

·
Registered
Joined
·
620 Posts
thar be a big tb!
 

·
Registered
Joined
·
5,363 Posts
Discussion Starter #5
Ahh speak of the devil. When are you gonna get some more of your fuel rails and throttle body kits up Pallnet? I've seen your TBs with the lexan spacer and all, but can you email me a couple pics of your fuel rails, it's been a while since I've seen one. [email protected] thanks!
 

·
Registered
Joined
·
5,820 Posts
****, most cars on the street don't need a TB that big. A buddy has a modded 94 GT Mustang and was talking about upgrading to a 65mm or 70mm with extensive exhaust work, and Cobra intake and heads, (300 HP +)
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top