ZCar Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
903 Posts
Discussion Starter #1
does it look like this exhaust manifold is missing all the holes to bolt up to the head?!?!? looks like they are cracked off or just missing or something...


<http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7927956835&category=33632>
 

·
Registered
Joined
·
2,784 Posts
It's you...............

.........doesn't need holes, held on by manifold vacuum.

Wink, Wink



Research.........................
 

·
Registered
Joined
·
349 Posts
there are only 3 actual holes on the exhaust manifold flange (they're on the middle double runner, as you can see on that link). on the other runners you can see semi circular flat spots, they are where the large washers, pressed down by a nut on a mounting stud screwed into the head, hold the manifold against the head.

the large washers also clamp onto the intake manifold on corresponding flat spots, so one stud, nut and washer clamps both the intake and exhaust manifold to the head.
 

·
Registered
Joined
·
4,687 Posts
It's just you....

That is what they look like, nothing wrong or abnormal about that one.
 

·
Registered
Joined
·
620 Posts
When the intake and exhaust manifold are together there is a hole there, sorta :)
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top