ZCar Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
I have an '81 280zx injected parts car and am in the process of removing the motor for future use in my '71. I have removed the injection wiring harness an ecu. Is there any other injection components that I need to remove before I have the rusty carcus junked?

Are there any aftermarket programable ecu's for this injection?
 

·
Registered
Joined
·
2,698 Posts
all the sensors under the t stat housing, the AFM throttle body....do a search, theres a lot of posts that ask this...
 

·
Registered
Joined
·
2,416 Posts
Everything but the frame....you know somewhere down the road you would be saying........Darn I left those thingys in the rust bucket I had towed away. After going to the J. Yard for so long and seeing so many
in good shape Zs just get crushed, with good turbo motors and trannys
and on and on parts, its a shame someone didnt want any of that stuff.

Many P90 heads....crushed, so many parts could of been picked and paid
pretty much nothing for, but now......1 big hunk of metal, to be shipped to
Japan......So everyone can have there new Honda SUVs. To bad so sad.

Charles
 

·
Registered
Joined
·
18 Posts
Discussion Starter #6
New to this forum and had no idea I could search topics' sorry bubblequinea.
Found Cardinal Zen's FI manual and studied. HOWEVER, my '81 does not seem to have the EFI relay in the same spot as the manual. MY Study show's that the EFI wire harness is seperate. Have all attatched to harness.
Anyone know location of the '81 relays (I assume fuel pump relays) are located, or have they eliminated the Droppin resistor and I am misidentifying something.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top