ZCar Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
538 Posts
Discussion Starter · #1 ·
see older listings zxjet.....I cleaned the positive and negative leads to coil.I bot som electerical cleaner and
cleaned and double cleaned the wires leading to the ignition coil module. I also sprayed and cleaned the **** out of red and green wires from the ignition module to the inside of the distribututor. The car wont start and the techometer is dead shows the engine not cranking.. when the car does start the tech does move and the engine catches. I used good ohm meter and the two wires inside the distributitor ohm out to 275 the book says needs to be around 400 I cant belive that small of a drop in ohms will not let the car start. Am I really gonna have to replace the whole distributitor and ignition module if you have exereienced this problem let me know your fix THANKS
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top