ZCar Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
107,695 Posts
Discussion Starter · #1 ·
I have an intermittant valvetrane tap/clicking
that starts when water temp gauge needle is
on the 1st mark, then dissappears by the time
it gets to the 2nd mark.Engine has 110,000mls.
The guy at Z-docs in Tampa fl said they usually last about 200,000 mls.The clicking is comming
from cyl #6 only.any suggestions??Already tried
RISLONE.Also does anybody know anyplace else to
get new hyd valve pivots other than nissan?
 

·
Registered
Joined
·
27 Posts
> I have an intermittant valvetrane
> tap/clicking
> that starts when water temp gauge needle is
> on the 1st mark, then dissappears by the
> time
> it gets to the 2nd mark.Engine has
> 110,000mls.
> The guy at Z-docs in Tampa fl said they
> usually last about 200,000 mls.The clicking
> is comming
> from cyl #6 only.any suggestions??Already
> tried
> RISLONE.Also does anybody know anyplace else
> to
> get new hyd valve pivots other than nissan?
We have had this problem Finding new H lifters is next to impossible Try good condition used and DONT dismantle and clean them
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top