ZCar Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
First off, 75 280Z. Ok, now how can I remove the light casings, not the plastic part, but the body part bolted and screwed to the car. Most of the Screws are either rusted and/or striped and i hav no way to remove the casings. Any Suggestions?

Low Rider
 

·
Registered
Joined
·
2,676 Posts
Are you talking about the fender extension or the Lamp bucket. The fender extension is held on by 3- 8mm nuts inside the fender and 10mm bolts iside the hood and around the edge of the valance. The lamp buckets are held on by four screws inside the fender. If they are real rusty you will have to drill the heads of them to get the buckets out.
 

·
Registered
Joined
·
107,695 Posts
craftsman just came out with a new tool for that. i think it's called screw out. basically a screw extractor, but you don't have to drill anything. go to sears.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top