ZCar Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,328 Posts
you should plan on buying new spindle pins, often the threads do no to well in the removal process. they tend to get stuck due to corrosion but also deforming the pin in the middle from the lock pin is common.

You can also try large washers stacked on the end such that you use the pin threads like a puller (pull thru the large opening created by the use of large washers). Its also tough on the threads likely to damage them as well, but generally you can get the spindle pin out. I would guess a impact hammer on the end of the pin (with a nut on it to prevent mushrooming the end of the threads) would be something worth trying as well.
 
1 - 1 of 1 Posts
Top